There are many reasons your car’s check-engine light turns on after you fuel up. It could be a loose gas cap, a gasket gone bad on said gas cap, or a damaged vacuum hose, among others. … If it detects a loss of pressure, the check-engine light will come on, indicating that there’s a problem.
How do you reset the check engine light on a gas cap?
All you need to do is secure the gas cap and drive the car. The light will turn off by itself after you drive the car. Be patient. If you rather not wait any repair station can reset the warning light but they usually charge.
How long before check engine light goes off after gas cap?
The check engine light should go off after you drive for several minutes if the light was caused by a loose gas cap. Pay attention to the dashboard after the check engine light experience. If you find that the light keeps coming on, and goes off again once you tighten the gas cap, then your gas cap is too loose.
Can fuel injector cleaner cause check engine light?
A fuel system cleaning should not cause a check engine light. And the solution to a check engine light is not just to clear the codes.
Why is my check engine light on after I fixed the problem?
A loose or damaged gas cap is actually a pretty common reason that a check engine light will come on. Your car’s computer probably just needed a little help after you fixed the issue. You did the right thing! Yes, as long as your check engine light stays off throughout the smog test, you should be fine.
Can a bad gas cap cause the check engine light to come on?
Fuel System Issues
Faulty gas cap – Your vehicle is pretty good at warning you of any potential trouble. Something as simple as forgetting to replace the gas cap could cause your “check engine” light to come on. … A loose or broken gas cap can dramatically reduce fuel efficiency and increase emissions.1 мая 2014 г.
Can AutoZone reset check engine light?
Re: Clearing car “Check Engine” light
If you just want to just check what the code is complaining about, AutoZone will test your car for free. They won’t clear the code, though. That could put them in a bad legal situation if the owner has problems later on.
How can I tell if my gas cap is bad?
Usually a bad or failing gas cap will produce a few symptoms that can alert the driver of a potential issue.
- Cap does not tighten properly. One of the most common symptoms of an issue with the gas cap is a cap that does not tighten properly. …
- Fuel smell from the vehicle. …
- Check Engine Light comes on.
How many miles do you have to drive to reset oxygen sensor?
Here’s something you probably don’t know: after clearing the car’s computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.
Why is my check engine light still on after changing o2 sensor?
If you changed the o2 sensor and cleared the code and it came back, then it could possibly be a bad o2 sensor again, maybe the wrong one was changed, maybe you have an issue with your exhaust or catalytic converter. After you complete a repair like that it’s best to clear the code with an obd2 reader capable of that.
What is the most common reason for check engine light?
Common causes of a check engine light
Gas cap is loose: Tighten the gas cap. If you’ve lost it, replace it with a new one. Oxygen sensor is bad: You’ll need a new sensor — but identify which one is bad first. Spark plugs may be fouled or failing: Replace the spark plugs.
How long does it take for STP fuel injector cleaner to work?
When using the STP Professional Petrol Injector Cleaner, how long will a complete injector clean take? Created with Sketch. We recommend STP Professional Petrol Injector Cleaner is added to the fuel tank before taken for a 10 minute drive to work its way through the fuel system.
Will a bad o2 sensor always trigger a check engine light?
No. A check engine light usually comes on when emissions are affected. An O2 sensor is designed to work til it fails. It can get “lazy” by not giving the proper reading to the computer quick enough which may or may not be enough to set the light.
How long do you have to drive to reset engine light?
To make sure the check engine light does not reappear, it’s recommended that you drive your car 30 to 100 miles. This enables the vehicle’s “Drive Cycle” to reset, as the various sensors need time to recalibrate.
Can your engine light came on for no reason?
When your car’s check engine light illuminates your dashboard, it’s usually accompanied by a sinking feeling in the pit of your stomach. The light could be a minor issue, such as a faulty gas cap, or it could mean something more serious, such as a misfiring engine.
How can I tell if my engine code has been cleared?
If the MIL (yellow engine icon) turns off abruptly after 20 seconds, then you know the DTCs have been reset by the engine monitoring system and not by a scan tool or by disconnecting the battery.