Why is slip important in an induction motor?

In actual operation, rotor speed always lags the magnetic field’s speed, allowing the rotor bars to cut magnetic lines of force and produce useful torque. This speed difference is called slip speed. Slip also increases with load and it is necessary for producing of torque.

What is the significance of slip?

Importance of Slip

The torque is directly proportional to the rotor current. Hence, torque is directly proportional to slip. The above equation shows that the torque induces on the rotor is directly proportional to the slip of the induction motor. The high value of slip induces the emf in the rotor.

Under what condition the slip in an induction motor is greater than one?

So if the magnetic flux is revolving in the direction of clockwise, then the rotor will turn rotating in the anti-clockwise direction. So, the speed among them will be like (Ns + Nr). In braking or Plugging of this motor, the slip is greater than ‘1’ is attained to rapidly bring the rotor of the motor at rest.

IT IS INTERESTING:  Does Tesla have a motor for each wheel?

What happens if the slip of induction motor is one?

Slip = 1, means that rotor is stationary. Negative value of slip in induction motor can be achieved when the rotor speed is more than the synchronously rotating magnetic flux.

What is normal slip of an induction motor?

Because of this speed difference, the motor rotates at a speed slightly slower than the synchronous speed. Slip is normally expressed in percentage. Slip of a power induction motor is 2 to 3% when the motor is operated under the rated load.

What causes motor slip?

The interaction of currents flowing in the rotor bars and the stators’ rotating magnetic field generate torque. In actual operation, rotor speed always lags the magnetic field’s speed, allowing the rotor bars to cut magnetic lines of force and produce useful torque. This speed difference is called slip speed.

What is meant by slip in induction motor?

Slip is the differentiation between synchronous and asynchronous speed. … The difference between the synchronous speed of the electric motor magnetic field, and the shaft rotating speed is slip – measured in RPM or frequency. Slip increases with increasing load – providing a greater torque.

What is Torque slip characteristics?

The torque slip curve for an induction motor gives us the information about the variation of torque with the slip. The slip is defined as the ratio of difference of synchronous speed and actual rotor speed to the synchronous speed of the machine.

What is the value of slip at maximum torque in 3 phase induction motor?

So, when slip s = R2 / X2, the torque will be maximum and this slip is called maximum slip Sm and it is defined as the ratio of rotor resistance to that of rotor reactance.

IT IS INTERESTING:  You asked: Which motor is best for electric bicycle?

What is cogging and crawling in induction motor?

A.Cogging can also be reduced by using skewed rotor. Q.What is Crawling? A: It has been observed that squirrel cage type induction motor has a tendency to run at very low speed compared to its synchronous speed, this phenomenon is known as crawling. The resultant speed is nearly 1/7th of its synchronous speed.

How is motor rating slip calculated?

The multiplication of 100 and speed difference divided by the synchronous speed is known as slip of an induction motor. It’s always represented in percentage, generally it ranges from 0.4% to 6% based on its design factors.

What does negative slip mean?

If slip is negative, the “input power” to the electrical terminals will be negative, implying that power is flowing out of the electrical terminals.

How does an induction motor start?

When the supply is connected to the stator of a three-phase induction motor, a rotating magnetic field is produced, and the rotor starts rotating and the induction motor starts. … At the time of starting, the motor slip is unity, and the starting current is very large.

What are the applications of induction motor?

AC induction motors are the most common electric motors in the world. These simple, reliable and economical motors are found in refrigerators, washing machines and furnaces, as well as conveyors, pumps, winders, wind tunnels and other industrial equipment.

Motors