# What is a 56 frame electric motor?

Contents

Typical examples are frame numbers 48, 56, 145, and 215. The frame number relates to the “D” dimension (distance from center of shaft to center bottom of mount). For example, in the two-digit 56 frame, the “D” dimension is 31/2”, 56 divided by 16 = 31/2”.

## What is the difference between a 56 and 56c frame?

it depends on the motors frame size, the one in the link is a FRAME 56C, the “C” stands for c faced, the 56 frame is a very popular frame, and used on many many motors, but I can not tell you if the gear box will fit with out either measurements or what face it is designed with.28 мая 2008 г.

## What is a 56c frame motor?

1/3rd to 3 HP 1800 and 3600 C flange with removable feet, our 56C Frame motors are suitable for a variety of commercial/industrial applications. These NEMA 56C Frame motors have removable bolt on/bolt off bases with mounting holes punched for NEMA 56 and NEMA 143T and NEMA 145T applications.

IT IS INTERESTING:  Question: What motor does the Tesla Model S use?

## What is motor frame number?

“Standard Frame Number Designations” are expressed in either two or three numbers. Common examples of motor frame size numbers are: 48, 56, 145, and 215. Two-Digit Frame Number – Indicates a fractional horsepower motor less than 1 horsepower.

## What size is a 48 frame motor?

You can figure that a 48 frame motor will have a shaft height of 48 divided by 16 or 3 inches. Similarly, a 56 frame motor would have a shaft height of 3-1/2 inches.

## How do you determine engine frame size?

The two-digit frame number relates to the shaft height in sixteenths of an inch. You can figure that a 48-frame motor will have a shaft height of 48 divided by 16, or 3 in. Similarly, a 56-frame motor has a shaft height of 3.5 in.

## How do I find out my motor frame size?

The frame number relates to the “D” dimension (distance from center of shaft to center bottom of mount). For example, in the two-digit 56 frame, the “D” dimension is 31/2”, 56 divided by 16 = 31/2”.

## What is the difference between 48 and 48y frame?

The only difference between the 56Y and 48Y frame is the circumference of the motor. They will both mount to the seal plate of the pump.

## What does TC mean on motor frame?

Three-Phase Cast Iron

## What does C face motor mean?

A “C-Face” motor is a common American mechanical standard designed with a rugged flange on the face of the motor for mounting purposes. The weight of the. motor is supported by the flange, which is most commonly attached to a gearbox. The flange is strong enough to cantilever the motor.

IT IS INTERESTING:  How do you protect an induction motor?

## What is NEMA motor size?

Step motors are categorized by NEMA frame size, such as “size 11” or “size 23” or “size 34”. Generally speaking, a size 11 step motor means the mounting face of the motor is 1.1 inches square; A size 23 step motor is 2.3 inches square; A size 34 step motor is 3.4 inches square, etc.

## What is frame size?

Body frame size is determined by a person’s wrist circumference in relation to his height. For example, a man whose height is over 5′ 5″ and wrist is 6″ would fall into the small-boned category.

## How do you measure an electric motor shaft?

The frame number relates to the “D” dimension (distance from center of shaft to center bottom of mount). For a two digit frame divide the frame number by 16 to arrive at this dimension. For example, in the two-digit 56 frame, the “D” dimension is 3½” (56 divided by 16 = 3½”).

## What is the difference between 48y and 56y frame?

The only difference between the 56Y and 48Y is the circumfrence (width) of the motor. They will both mount to the seal plate but the 48Y will need an optional spacer (that comes with the motor) to sit on to make up for the difference in size.

## What is NEMA 56c?

NEMA set standards of height, width and length for electrical devices so that one manufacturer’s products could easily interchange with another’s. Standard 56C defines the bolt hole spacing of mounting face plates for electrical devices, and these measurements are closely adhered to by all NEMA members.

IT IS INTERESTING:  You asked: Who actually started Tesla Motors?