1 Horsepower is equal to 745.7 watts of electrical power, so in theory a 5HP motor operating at 100% efficiency will consume about 3.728kW of power. In one hour, it will use 3728.5 kilowatt-hours. Of course, no motor is 100% efficiency, so the motor will actually consume somewhat more power than this.
How much does it cost to run an electric motor?
monthly cost of running the motor – including that motor’s share of demand charges and taxes as well as its kWh consumption. In our example, if the average cost of kWh is 11.2 cents, then the cost of running this 20HP motor would be 4230 x 0.112, or $474 per month.
How much electricity does a water motor use?
A typical water pump’s wattage can vary between 250 watts to 1,100 watts. Take the wattage of the specific water pump and multiply it times how many hours a day it runs. Then, multiply it by how many days a year it runs, and divide by 1000.
How do you calculate kWh of a motor?
Multiply the motor voltage by the full-load current. The result is in watts. Divide watts by 1,000 to give kilowatts. For example, 230 volts x 20 amps = 4,600 watts; 4,600 watts divided by 1000 = 4.6 kilowatts.
How much does it cost to run a 10 hp motor?
If the motor is loaded to 10 hp, which it probably isn’t, its drawing 746 watts per hp divided by the efficiency, probably about 90% for a motor that size or a total of 8.29 KWH for each hour it runs. At 14 cents per KWH, that would be $1.16.
How much does it cost to run a 100 hp electric motor?
Expect actual operating costs to vary. For example, a 460-volt, three-phase, standard efficiency 100 HP motor operating under full load for 8,760 hours per year will probably cost just over $48,000 per year to operate at an electric rate of $0.10 per kWh.
How much power does a 1hp motor consume?
1 unit = 1 kilowat-hour, i.e. when an electrical appliance consumes 1 killowat of Power for one hour . Here, we have a 1 HP motor. So, 1 HP for 24 hour = 746×24= 17904 Watt-hour which is equal to 17904/1000= 17.904 units.
Are water pumps expensive to run?
Running costs for pumps
The very smallest in-pond filter/UV system (18w) — 8p per day. A 55watt UV lamp — 24p per day. A medium sized, 30cm wide, waterfall 1m high (60w) — 27p per day.
How much power does a 2 hp motor use?
How many watts does a 1 hp electric motor use?HorsepowerWattsRounded Watts1 hp745.699872 W746 Watts2 hp1491.399744 W1491 Watts3 hp2237.099616 W2237 Watts4 hp2982.799488 W2983 Watts
How much power does a 1hp pool pump use?
Pool pumps use up to 2,500 kWh per year to circulate and filter the water. The average monthly costs for a 1 HP pump running 8 hours per day in Florida is approximately $30*.
How do you calculate the power of a motor?
By taking the voltage and multiplying it by the associated current, the power can be determined. A watt (W) is a unit of power defined as one Joule per second. For a DC source the calculation is simply the voltage times the current: W = V x A.
What is the formula for power consumption?
The first step in calculating your energy consumption is to figure out how many watts each device uses per day. Just multiply your appliance’s wattage by the number of hours you use it in a day. This will give you the number of watt-hours consumed each day.
How do you calculate kWh per day?
One kilowatt is equal to 1,000 watts, so to figure out the kWh per day that your refrigerator uses, you simply need to divide the watt-hours per day (7,200) by 1,000 for a total of 7.2 kWh per day.
How much does it cost to run a 1 hp motor?
Our 1 hp (standard) example UST1102 motor above will cost between $1-$5 per day, depending on what your power company charges per kWh, and on how many hours per day the pump is running, which changes within the season. This will result in a monthly cost of $30-$150.
How is motor running cost calculated?
The equation is W = AV(sqrt 3) where A is amperes, V is volts, and sqrt 3 is the square root of 33 (about 1.73). W is the power consumption in watts. For example, if the electric motor uses 50 amps at 240 volts, the wattage is 50 x 240 x 1.73, or 20,760 watts.
How much electricity does a 30 hp motor use?
Designed power capacity of a motor 30 HP,at 415 V, 3 phase power factor 0.8 (assumed). Full load current is , one HP is 745 w, 30 HP is 30 x 745 =23.35 kW, W = V x I x pf, 23.35 = 415 x I x 0.8, I = 23.35 divided by 415 x 0.8 = 67 amps.