AC induction motors have no brushes and have a much longer life expectancy. DC motor speed is controlled by varying the armature current, while AC motor speed control is achieved by varying the frequency of the alternating current, often with a variable frequency drive(VFD).
Why do some AC motors have brushes?
The function of the brushes is to conduct electricity to the individual segments as they rotate from brush to brush. This allows the motor to turn in one direction at a speed determined by the number of windings in the armature.
Why brushes are not used in AC motor?
The resistance of the sliding contact between brush and commutator causes a voltage drop called the “brush drop”. This may be several volts, so it can cause large power losses in low voltage, high current machines. Alternating current motors, which do not use commutators, are much more efficient.
Does a universal motor have brushes?
A universal motor is a series-wound motor — meaning that the field and armature windings are connected in series — and is mechanically commutated with brushes and a commutator.15 мая 2018 г.
Do induction motors have capacitors?
A capacitor-start induction motor only has a capacitor in series with the auxiliary winding during starting. A capacitor-run motor typically has a large non-polarized electrolytic capacitor in series with the auxiliary winding for starting, then a smaller non-electrolytic capacitor during running.
How long do motor brushes last?
What is normal brush life. As an estimate, 7,500 hours brush life is normal for general purpose, medium horsepower DC motors with good commutator film with commutator surface speeds in the range of 2,500 to 4,000 feet per minute. The minimum life might be 2,000 to 5,000 hours with 10,000 hours being about maximum.
Why does an AC motor not need a commutator?
The main purpose of commutator is only to convert Ac to DC or vice versa, But in case of alternaters Commutator is not required because output will be AC only not DC. In case of DC generators Generation is AC so by using commutator will convert the AC to DC.
Which is more powerful AC or DC motor?
AC motors are generally considered to be more powerful than DC motors because they can generate higher torque by using a more powerful current. However, DC motors are typically more efficient and make better use of their input energy.
Why are DC motors more expensive than AC?
The rotor design is probably the most important factor in making the DC motor more expensive. If the DC motor stator has permanent magnets, that could make it more expensive or not depending on the magnet material. There are many more manufacturers making AC motors and many more AC motors used at 1000 kW.
Which is more efficient AC or DC motor?
Consequently, AC motors are less efficient than DC motors. In fact, the DC motor is 30% more efficient than AC motors due to the secondary magnetic field being generated from the permanent magnets rather than copper windings.
How can you tell if a motor is universal?
Look for the stator core construction and rotor. If there is no commutator, then it is a AC motor. If there is a commutator and brushes, it may be either a DC motor or an AC commutator motor (Universal motor).
Can you run a AC motor on DC?
1 Answer. The AC series motor you describe is a universal motor, and will work fine on DC. … With the field winding in series with the armature current the motor is insensitive to the direction of current, so once you have the necessary laminations to keep losses down when running on AC the motor becomes universal.
Will a motor run without a capacitor?
Capacitor Run Motor
This type of motor capacitor is permanently connected in series with the start winding and provides torque all the time. Therefore, this type of motor will not be able to run without a capacitor even after applying an initial push.
What happens if capacitor fails in motor?
When a capacitor short-circuits, the winding in the motor may burn out. When a capacitor deteriorates or opens, the motor has poor starting torque. Poor starting torque may prevent the motor from starting, which will usually trip the overloads.
Can I replace a capacitor with a higher UF?
There is a maximum of +10% tolerance in microfarad rating on replacement start capacitors, but exact run capacitors must be replaced. Voltage rating must always be the same or greater than original capacitor whether it is a start or run capacitor.